Loading A Compact Disc Vertically - LG GSA-4167B Installation And Using Manual

Loading a Compact Disc Vertically

2
2
3
4
5
3
Note: The DVD-RAM drive must be in the horizontal position if you are using an 8cm
disc.
To load a compact disc into a vertically mounted drive, do the following:
1. Press the Load/Unload Button to open the tray.
2. Fold out the stopper (D).
3. Raise disc holders A and B so that they are higher than the tray.
4. Insert the disc diagonally between the stopper and the tray and push it about 1cm
towards the stopper.
5. Pull the disc back so it fits between the tray and disc holders A and B.
6. To close the tray, press the Load/Unload button, or gently push the tray in.
17
Chapter 5. Using the 4.7GB SCSI-2 DVD-RAM Drive