Remote Register; Allocation Of The Remote Register - Mitsubishi AJ65SBT-62DA User Manual

3 SPECIFICATION

3.6 Remote Register

3.6.1 Allocation of the remote register

Transfer Direction
Master Remote
Remote Master
The AJ65SBT-62DA has a remote resister for data communication with the master
module. The remote register allocation and data structures are described below.
The allocation of the remote register is shown in Table 3.7.
Table 3.7 Allocation of the remote register
Address
RWwm
RWwm+1
RWwm+2 Analog output enable/disable setting
RWwm+3 Output range/HOLD/CLEAR setting
RWrn
RWrn+1
RWrn+2
RWrn+3
POINT
Do not execute read or write to the remote register that is not allowed to use. When
a read or write is executed, the functions of the AJ65SBT-62DA is not guaranteed.
Description
CH. 1 digital value setting
CH. 2 digital value setting
CH. 1 check code
CH. 2 check code
Error code
Reserved
m, n: The address set for the master station in the station number setting.
3 - 13
MELSEC-A
Default Value Refer to
0
Section 3.6.2
0
0 Section 3.6.3
0 Section 3.6.4
0
Section 3.6.5
0
0 Section 3.6.6
0