Sanyo MLS-3751 Instruction Manual page 11

Control panel
Digital display II
Indicates the set time, remaining
time, sterilization cycle, exhaust
rate, cautionary messages, error
messages, date and voice guide
setting.
Digital display I
Indicates the current temperature,
sterilization set temperature,
melting set temperature, exhaust
starting temperature, date,
hour/minutes and voice guide
setting.
Timer button
Sets the time until the start of
operation.
Up/Down buttons
Used for setting and changing the
sterilization temperature,
sterilization time, melting
temperature, melting time, heat-
retention temperature, exhaust
temperature, start timer and
exhaust rate.
Time button
Current time is indicated on
digital display I.
Process monitor lamp
Indicates the status of the current
process with a flickering bar.
Selection indicator lamp
Indicates the selected sterilization
cycle with a lit lamp.
Under-pressure lamp
Lights up when the chamber is
internally under pressure.
Setting confirmation button
Indicates change of settings and
settings of current operation on
the digital displays I and II.
Cooling fan button
Used to engage the cooling mode
during exhausting.
Cycle/program selector button
Selects any of 3 programs and 4
cycles (total 12 selections).
Cover lock lamp
Lights up when operation starts
with the cover locked.
Object temperature button
When the optional object
temperature sensor is installed
and this object temperature
button is pressed, the lamp lights
up and the sterilization timer is
controlled by the temperature of
objects to be sterilized.
Object temperature lamp
The lamp lights up when this
button is pressed.
Model No. indication
Stop button
Stops operation and cancels
timer settings and heat-retention.
Start button
Starts operation and timer-set
operation.
10