On Voice Guide - Sanyo MLS-3751 Instruction Manual

On Voice Guide

The voice guide of the product is nothing but an auxiliary function.
For safe use this function, please read the precautions and
instructions for use in this manual.
The voice guide of this product can be set to either
Standard Mode
The voice guide has been set at Standard Mode at the time of shipment.
Standard Mode
•
For safe use of the product, precautions and operating instructions
are informed in voice.
[Example of Liquid Sterilization]
When the cover is closed Was the amount of heating water checked?
Press the cycle selector
button.
Press the set./confirm.
button.
Press the start button.
Operation is completed.
Warning Mode
•
Points to be confirmed and checked when the safety device worked
to stop the operation of the product will be guided in voice.
[Example of Liquid Sterilization]
The product starts with
the cover being open.
When opening the cover
In E5 (Heating without
water)only
In CH checking
*In the Standard Mode, the messages of the Warning Mode are
informed also by voice guide.
To change the voice guide settings
1) Press the
button in standby status.
appears on the digital display I.
appears on the digital display II.
The
optional printer.
2) Press the button.
appears on the digital display I.
appears on the digital display II.
3) Press the
digital display II.
Display II
3
2
1
4) Press the button for setting.
Voice guide starts in set mode.
25
or Warning Mode .
The liquid sterilization cycle is now in
operation.
Set the sterilization temperature.
The liquid sterilization operation will start.
The liquid sterilization operation has been
completed.
The cover is not closed.
Open the cover, paying attention to steam.
The safety device worked. Check the amount
of heating water.
Now is the time for checking.
button for longer than 2 sec. while pressing the
is the message that is used only for setting the
and buttons to change the figure on the
Mode Sound Volume
Standard Mode
Warning Mode
High
Middle
High