Feedback (Whistling) Problems; If The Sound Processor Becomes Very Wet; Functions And Audible Indicators - Cochlear Baha 5 User Manual

If the sound processor becomes very wet:

1. Immediately open the battery door
and remove the battery.
2. Put your sound processor in a container
with drying capsules such as a Dri-Aid Kit, etc.
Leave it to dry out overnight. Drying kits are
available from most hearing care professionals.
Function
Turn ON
Tunr OFF
Change program
Low battery warning
When using Cochlear Wireless Accessory or MFi
Change volume
Volume limit reached
Enable wireless audio streaming
Disable wireless audio streaming
Pairing confirmation
Toggle between wireless
accessories
Turn ON flight mode
Note: Your hearing care professional may have disabled some or all of the audible indicators.

Feedback (whistling) problems

See figure

Functions and audible indicators

On the device
Close battery compartment
Open battery compartment
Short button press
With Cochlear Baha Remote
Control, Cochlear Wireless Phone
Clip or with an iPhone
With Cochlear Baha Remote
Control, Cochlear Wireless Phone
Clip or with an iPhone
Long button press
Short button press
None
Long button press
Press button and close battery
compartment
11
1 Check to ensure that your sound processor is
not in contact with items such as glasses or a
hat, since that can cause feedback. Also ensure
the sound processor is not in contact with your
head or ear.
Check that the battery compartment is closed.
2
Check that there is no external damage to the
3
sound processor.
Audible indicator
10 beeps
None
1 beep for program 1
2 beeps for program 2 etc
4 beeps 2 times
1 beep indicates volume increase/
decrease
1 long beep
5 beeps (melody in upward scale)
1 beep for program 1
2 beeps for program 2 etc
5 beeps (melody in upward scale)
None
10 beeps 2 times
English
9