Cochlear Baha remote control 2 Quick Manual page 3

Pairing with Your Baha Sound Processor
Make sure the Remote Control 2 is fully charged and is turned ON.
Switch off your Baha sound processor
1
by opening the battery door.
Press the pairing button on the Remote Control once using
2
the tip of a pen or similar object.
The 'search' icon will display on the screen and the Remote
3
Control will now be in pairing mode for 20 seconds.
Note! If you have two sound processors, repeat step 1 to 6.
4
5
6
Connected to left
Searching for both
sound processor.
sound processors.
While pairing mode is active, switch on your
sound processor by closing the battery door.
Successful pairing will be indicated by an audible melody
played in the sound processor.
Searching and connecting to the sound processors.
Everyday
Searching for right
sound processor.