Connections; Stand Alone Setup - MIXVIBES U-Mix Control Pro User Manual

1 Connections

1.1 Stand Alone Setup

1 Connect outputs 1/2 of your U-MIX CONTROL PRO to your sound system (amplifier, powered speakers, or
home stereo).
2 Connect your headphones to one of the 'headphones' outputs of your U-MIX CONTROL PRO.
3 If necessary, connect your microphone to the 'microphone' input of your U-MIX CONTROL PRO.
4 Connect the supplied USB cable between the USB output of your U-MIX CONTROL PRO and a free USB slot
of your computer.
5 To turn on your U-MIX CONTROL PRO, set the rear panel selector to 'USB'.
6 After installing the software, set the CROSS DJ Audio preferences as described in the Audio Configuration
part of this manual:
MIXVIBES
SOFTWARE
USB
3.1 on page 12.
9V
0.5A POWER
DC IN OFF USB OUTPUT 3/4 OUTPUT 1/2
R L
R L R L
MIN MAX MIN MAX
TOUCH SENSOR
LEVEL C.F. CURVE
C
M
MICROPHONE
Y
CM
MY
Stand alone setup
CY
CMY
K
5 /
SPEAKERS
vibe-watermark-bright.pdf
INPUT 3/4 INPUT 1/2
LN PH LN PH
R L R L
HEADPHONES
L R
30