Configuring Cross Dj; Audio Configuration - MIXVIBES U-Mix Control Pro User Manual

3 Configuring CROSS DJ
3.1 Audio Configuration
1 Go to [File > Preferences > Audio]. Look at the figure on the following page to view the list.
2 Select "
MixVibes ASIO U-MIX CONTROL PRO
3 Choose your desired sample rate and buffer size. The default settings are 44.1kHz sample rate and
256 samples of buffer.
4 Select the inputs of the U-MIX CONTROL PRO from the pull down menus.
1 Stand alone setup: Select no input.
2 Turntables/CD Players and internal mixer setup: Select "
" for stereo input 1 and "
2
SOURCE button of the controller (shift + headphones).
3 MP3 players (iPod®) and internal mixer setup: Select "
stereo input 1 and "
button of the controller (shift + headphones).
4 Turntable/CD Player and external mixer setup: Select "
stereo input 1 and "
button of the controller (shift + headphones).
5 Adjust the input gain depending on your input source to have enough level but without clipping.
6 Set the input level to Line. Make sure to follow the connection instructions:
7 Select the outputs of the U-MIX CONTROL PRO from the pull down menus.
1 Stand alone setup: Select "
put is your system's Master out) and "
(this output is your system's Cue/Monitor out).
2 Turntables/CD Players and internal mixer setup: Select "
" for stereo output 1 (this output is your system's Master out) and "
2
Control Pro 4
3 MP3 players (iPod®) and internal mixer setup: Select "
stereo output 1 (this output is your system's Master out) and "
" for stereo output 2 (this output is your system's Cue/Monitor out).
Pro 4
4 Turntable/CD Player and external mixer setup: Select "
for stereo output 1 (this output is linked to player 1) and "
" for stereo output 2 (this output is linked to player 2).
4
8 Select your routing mode.
1 Stand alone setup: Select the routing mode Dual Stereo.
2 Turntables/CD Players and internal mixer setup: Select the routing mode Dual Stereo.
3 MP3 players (iPod®) and internal mixer setup: Select the routing mode Dual Stereo.
4 Turntable/CD Player and external mixer setup: Select the routing mode External Mixer.
" from the pull down menu.
U-Mix Control Pro 3/U-Mix Control Pro 4
U-Mix Control Pro 3/U-Mix Control Pro 4
U-Mix Control Pro 3/U-Mix Control Pro 4
U-Mix Control Pro 1/U-Mix Control Pro 2
U-Mix Control Pro 3/U-Mix Control Pro 4
C
M
" for stereo output 2 (this output is your system's Cue/Monitor out).
Y
CM
MY
CY
CMY
K
12 /
U-Mix Control Pro 1/U-Mix Control Pro
" for stereo input 2. Press the
U-Mix Control Pro 1/U-Mix Control Pro 2
" for stereo input 2. Press the SOURCE
U-Mix Control Pro 1/U-Mix Control Pro 2
" for stereo input 2. Press the SOURCE
vibe-watermark-bright.pdf
" for stereo output 1 (this out-
U-Mix Control Pro 1/U-Mix Control Pro
U-Mix Control Pro 1/U-Mix Control Pro 2
U-Mix Control Pro 3/U-Mix Control
U-Mix Control Pro 1/U-Mix Control Pro 2
U-Mix Control Pro 3/U-Mix Control Pro
30
" for
" for
1 on page 5.
" for stereo output 2
U-Mix Control Pro 3/U-Mix
" for
"