Using Several Handsets; Registering Handsets - Gigaset S328 Operating Instructions Manual

Gigaset S440 / SWZ-engl nur fuer Internet Swisscom / xxxxxx / registration.fm / 21.07.2006

Using several handsets

Using several handsets

Registering handsets

You can register up to a total of six hand-
sets on your base station.
A handset can be registered on up to four
base stations.
Automatic registration of handset to
the base Top S328
Important: The handset must not already
be registered to any base station.
Registration of the handset to the Top
S328 base station occurs automatically.
¤
Place the handset in the base station
with its display facing forward.
Registration takes around 1 minute. Dur-
ing this process Regstr.Procedure
in the display and the name of the base
station flashes e.g.
set has registered, its screen displays its
internal number, e.g.
number 2. The handset is assigned the
lowest available internal number (1-6).
If all internal numbers 1-6 have been
assigned, number 6 is overwritten, pro-
vided the handset with the internal
number 6 is in idle status.
Notes:
– Automatic registration is not possible when
the base station on which you wish to reg-
ister the handset is being used to make a
call.
– Press any key to cancel automatic registra-
tion.
– If automatic registration does not work,
you will have to register the handset
manually.
– You can change the name of the handset
(page 35).
32
appears
1.When the hand-
Base
INT 2 for internal
Manually registering the handset to
the base Top S328
You must activate manual registration of
the handset at both the handset and the
base station.
After it has registered, the handset returns
to idle status. The internal number of the
handset appears in the display, e.g.
If it does not, repeat the procedure.
On the handset
¢ ¢
v Ð
Handset
s
Select base station, e.g.
and press
~
Enter the system PIN of the
base station (the default is
0000) and press
screen will display, e.g.
On the base station
÷
Within 60 secs. press and hold
the registration/paging key on
the base station (approx. 3
secs.).
Registering other handsets
You can register other handsets and hand-
sets for other devices with GAP functional-
ity as follows.
On the handset
¤
Start to register the handset as
described in its user guide.
On the base station
÷
Press and hold the registra-
tion/paging key on the base
station (approx. 3 secs.).
INT 1.
¢
Register H/Set
Base 1
.
§OK§
. The
§OK§
Base 1.