Routine Maintenance And Cleaning - Indesit K6G20/R Installation And Use Manual

Hide thumbs

Table of Contents

Available languages

Before each operation, disconnect the appliance from

the electrical power supply. To ensure that the appliance

lasts a long time, it must be thoroughly cleaned frequently,

keeping in mind that:

• • • • •

Do not use steam equipment to clean the appliance.

•

The enamelled parts and the self-cleaning panels should

be washed with warm water, without using any abra-

sive powders or corrosive substances which could ruin

them;

•

The inside of the oven should be cleaned fairly often

while it is still warm, using warm water and detergent

followed by careful rinsing and drying;

• The flame spreaders should be washed frequently with

hot water and detergent, taking care to eliminate any

buildup;

• On cookers equipped with automatic lighting, the ter-

minal part of the electronic instant lighting devices

should be cleaned frequently and the gas outlet holes

on the flame spreaders should be checked to make

sure they are free of any obstructions;

• Stainless steel may become marked if it comes into

contact with very hard water or harsh detergents (con-

taining phosphorous) for long periods of time. After

cleaning, it is advisable to rinse thoroughly and dry. It

is also recommended that drops of water be dried.

• Clean the glass part of the oven door using a sponge

and a non-abrasive cleaning product, then dry thoroughly

with a soft cloth. Do not use rough abrasive material or

sharp metal scrapers as these could scratch the surface

and cause the glass to crack.

N.B.: Avoid closing the cover while the gas burners

are still warm.Remove any liquid from the lid before

opening it.

Important: Periodically check the wear of the gas hose

and substitute it if there are any defects; we recommend

changing it every year.