Table of Contents
Advertisement
Available languages
Available languages
Before each operation, disconnect the appliance from
the electrical power supply. To ensure that the appli-
ance lasts a long time, it must be thoroughly cleaned fre-
quently, keeping in mind that:
• • • • •
do not use steam equipment to clean the appliance
•
the enamelled parts and the self-cleaning panels,
where present, are washed with warm water without
using any abrasive powders or corrosive substances
which could ruin them;
•
the inside of the oven should be cleaned fairly often
while it is still warm, using warm water and detergent
followed by careful rinsing and drying;
•
the electric hotplates should be cleaned with a damp
cloth and lubricated with a little oil while still warm;
•
stainless steel may become marked if it comes into
contact with very hard water or harsh detergents
(containing phosphorous) for long periods of time. After
cleaning, it is advisable to rinse thoroughly and dry. It
is also recommended that drops of water be dried;
Warning: never place hot containers or items and
flammable materials inside the dishwarmer drawer.
! The internal surfaces of the compartment (where present)
may become hot.
Routine Maintenance and Cleaning
N.B.: Avoid closing the cover while the electric plates
are still warm. Remove any liquid from the lid before
opening it.
Replacing the Oven Lamp
•
Disconnect the oven from the power supply by means
of the omnipolar switch used to connect the appliance
to the electrical mains; or disconnect the plug if it is
accessible.
•
Remove the glass cover of the lamp-holder.
•
Remove the lamp and replace it with a lamp resistant
to high temperatures (300°C) with the following speci-
fications:
- Voltage: 230V
- Wattage: 25W
- Socket: E14
•
Replace the glass cover and connect the oven to the
mains.
16
Advertisement
Table of Contents
