Table of Contents
Advertisement
Chapter 3. Installation
Option: clearcall=
Option: log
Option: sendinitonmake=
Option: tracelevel=
Note: This option is available only in the Trace Enabled (debug) version of
panadrvr.
Option: maxcalltime=
12
Range: 0 or 1
Default: 1 (Enabled)
Runtime modifiable: Yes
Purpose: Specifies whether the driver honors CSTA clearcall commands
from applications. Clearcall commands allow the application to
disconnect ALL parties on a given call.
Range: N/A
Default: Off
Runtime modifiable: Yes
Purpose: Specifies whether the driver should create a trace log file in the
SYS volume in the SYSTEM directory called panadrvr.log. When active,
all console Trace Enabled (debug) messages are echoed to this file. Note,
this option has no effect on Trace-free (non-debug) versions of Panadrvr.
Range: 0 or 1
Default: 1 (Enabled)
Runtime modifiable: Yes
Purpose: Specifies whether the driver should send CSTA service initiated
events to an application when dial tone is returned from the DBS due to a
CSTA makecall request.
Range: 0 to 4
Default: 1 (most verbose)
Runtime modifiable: Yes
Purpose: Specifies the debug trace level for panadrvr. The range is from 1
(very verbose) to 4 (major errors only) or 0 -- no trace messages. Trace
messages appear on the system console and, optionally, in the log file.
Range: 1-65535
Default: 12
Runtime Modifiable: Yes
Purpose: Specifies the maximum time in hours that Panadrvr considers a
call to be valid. Should this timer expire, the call is removed from
Issued April 2000
Section 520 - TSAPI
DBS-92-520
Advertisement
Table of Contents
