Panasonic Section 520 Installation And Feature Description page 28

Digital business system section 520 dbs telephony services

Table of Contents

Chapter 5. Maintenance and Troubleshooting

The following error messages indicate a severe problem in the low level task

management system of Panadrvr. Panadrvr will attempt to recover from such

situations; however successive errors of this type indicate that Panadrvr is in

trouble. Should this occur, call Panasonic Technical Support.

TDILOGERROR(dname, ERROR, ALMLOC, alarmcnt++, "Unable to

allocate Tserver buffer, return code = %d\n", rc).

The Tserver has denied Panadrvr's request for a memory buffer.

TDILOGERROR(dname, ERROR, ALMLOC, alarmcnt++, "Insufficient

resources for newcall().").

Panadrvr could not allocate more memory from the Novell OS for

additional call blocks.

TDILOGERROR(dname, ERROR, ALMLOC, alarmcnt++, "Send to

server error first try (%d).", rc).

Panadrvr could not send a packet out over the network. It will wait 2

seconds and try again.

TDILOGERROR(dname, ERROR, ALMLOC, alarmcnt++, "Send to

server error second try (%d).", rc).

Panadrvr tried and failed a second time to send a packet over the

network. The packet has been lost.

TDILOGERROR(dname, ERROR, ALMLOC, alarmcnt++, "Ports -- Out

of free ports.).

Panadrvr is out of a critical system resource.