Description Of The Controls - Gallet MIX 310 Instruction Manual

Description of the controls

P1 Motor unit
P2 Switch I - speed 1
P3 Switch II Turbo
P4 Hanging loop
P5 Blender stick
P6 Measuring bowl
P7 Wall mount
Instruction for Use
Accessory Installation
Insert the k attachment in the motor unit so that arrow facing to open symbol (Fig.1). Then
screw the shaff in the direction shown by the locked symbol (Fig.2), using gentle hand pressure
only ensures that the Shift is fully fightened on to the motor unit. To disassemble the attachment,
proceed inversely.
Fig. 1
How to use the hand blender
The hand blender is perfectly suited for preparing dips, sauces, soups, mayonnaise and baby
food as well as for mixing and milkshakes. Fig. 3.
1) The steps to install the blender stick are described in " Accessory Installation".
2) Introduce the hand blender in the measuring bowl. Then press the control switch level I or
the switch level II (turbo).
3) You can use the hand blender in the measuring bowl and just as well in any other vessel.
When blending directly in the saucepan while cooking take hand blender from overheating.
4) Turn the blender stick off the motor unit after use.
ENG - 15
Fig.2
ENG