Setting The On/Off Timer - Samsung AR12JV5HATQ User & Installation Manual

Setting the On/Off timer

Setting the On timer
When the air conditioner is off;
Remote controller display
additional options available in On/Off time mode (When the remote controller is on)
You can select from Auto/Cool/Dry/Fan .
You can adjust the temperature in Auto/Cool/Dry mode .
You can adjust the fan speed in Cool/Fan mode.
• When On timer setting is completed, the set status will be displayed for 3 seconds, and then only (On)
indicator will remain on the remote controller display thereafter .
• If you press the Power
Timer indicator on the indoor unit display will disappear and the On timer will be cancelled . Even though the
On timer is cancelled, (On) indicator on the remote controller will remain displayed .
• When the On timer is set while the air conditioner is off, Timer indicator ( ) will be displayed and remain on
until the On timer turns on.
RAC BORACAY_EN_Eco-inverter IBIM_05124A-00.indd 18
1. Press the Timer button to select (On).
- (On) indicator will keep blinking and you can set the time .
2. Press the button to set the time.
- You can set the time in half hour unit from 30 minutes (0 . 5 on the display) ~
3 hours and hour unit from 3~24 hours .
- Time can be set from minimum 30 minutes to maximum 24 hours .
3. Press the SET button to complete the On timer setting.
- (On) indicator and the set time of the timer will be displayed on the remote
controller display and the Timer indicator ( ) will be displayed on the indoor
unit display .
- On timer setting will be cancelled if you don't press the SET button within
10 seconds after setting the time . Therefore, check for the (On) indicator on the
remote controller display and the Timer indicator ( ) on the indoor unit display .
f Press the Timer button → select (On) → press the f
Cancel
→ set the timer to
button on the indoor unit after setting the On timer from the remote controller,
English-18
→ press the SET button .
or button
2014-12-18 오후 3:06:40