Setting The On/Off Timer - Samsung AR7000 Manual

Setting the On/Off timer

Setting the On timer
When the air conditioner is off;
Remote controller display
You can select from Auto/Cool/Dry/Fan /Heat.
You can set the temperature after selecting the operation mode.
Temperature adjustment is available when Auto/Cool/Dry /Heat mode is selected.
When On timer setting is completed, the set status will be displayed for 3 seconds, and then only (On)
indicator will remain on the remote controller display thereafter.
If you press the Power
Timer indicator on the indoor unit display will disappear and the On timer will be cancelled. Even though the
On timer is cancelled, (On) indicator on the remote controller will remain displayed.
When the On timer is set while the air conditioner is off, Timer indicator ( ) will be displayed and remain on
until the On timer turns on.
AR7000 CV HP_IB&IM_DB68-05637A-00_EN.indd 17
1. Press the Timer button to select (On).
- (On) indicator will keep blinking and you can set the time.
2. Press the button to set the time.
- You can set the time in half hour unit from 30 minutes (0.5 on the display) ~
3 hours and hour unit from 3~24 hours.
- Time can be set from minimum 30 minutes to maximum 24 hours.
3. Press the SET button to complete the On timer setting.
- (On) indicator and the set time of the timer will be displayed on the remote
controller display and the Timer indicator ( ) will be displayed on the indoor
unit display.
- On timer setting will be cancelled if you don't press the SET button within
10 seconds after setting the time. Therefore, check for the (On) indicator on the
remote controller display and the Timer indicator ( ) on the indoor unit display.
Press the Timer button
set the timer to
Cancel
Press the Power (
Additional options available in On time
button on the indoor unit after setting the On timer from the remote controller,
English-17
select (On) press the
press the SET button.
) button.
or button
2015/10/12 15:42:59