Samsung AR12JV5HATQ User & Installation Manual page 32

PROBLEM
Fan speed
adjustment is not
working.
Remote controller is
not working.
Timer function does
not set.
The indicator
is blinking
continuously.
Odors permeate in
the room during
operation.
Error is indicated.
Noise is generated.
Smoke is generated
from the outdoor
unit.
Water is dropping
from the outdoor
unit piping
connection.
RAC BORACAY_EN_Eco-inverter IBIM_05124A-00.indd 31
SOLUTION
• C heck if you have selected Auto/Dry/Fast/
mode. In these modes, fan speed is set to Auto and you
cannot adjust the fan speed.
• Check if your batteries are depleted.
• M ake sure nothing is blocking your remote controller
sensor.
• C heck if there are strong lighting apparatus near the air
conditioner. Strong light which comes from fluorescent
bulbs or neon signs may interrupt the electric waves.
• C heck if you press the SET button on the remote
controller after you have set the time.
• P ress the Power button or disconnect the power plug/
switch off the auxiliary power switch.
If the indicator is still blinking, contact the service center.
• C heck if the appliance is running in a smoky area.
Ventilate the room or operate the air conditioner in Fan
mode for 1~2 hours. (We do not use smelly components
in the air conditioner.)
• C heck the Drains have been cleared Regular
Maintenance.
• W hen an indoor unit indicator blinks, contact the nearest
service center. Please ensure the error code is passed
onto the service center when booking the service call.
• D epending on the status of the air conditioner usage,
noise can be heard when refrigerant flow movement
changes. It is normal.
• I f may not be a fire but it can be a steam generated by the
defrost operation from outdoor heat exchanger during
Heat mode in winter.
• W ater may be generated because of the temperature
difference. It is normal.
English-31
2014-12-18 오후 3:06:47