Uniflair Amico Installation Manual page 8

MODELS
The code which distinguishes the models is composed of 4 characters:
Identifying prefix of the Amico family
Air discharge
U = Upflow (upwards discharge)
D = Downflow (downwards discharge)
Operating typology
C = Chilled water units
A = Air cooled direct expansion units
W = Water cooled direct expansion units
Fan typology
V = Radial Electronically Commutated fans
C= Centrifugal fans
Indicative cooling capacity
Number of cooling circuits
Power supply voltage
A = 400 V / 3Ph (+N) / 50 Hz
B = 230 V / 1 Ph / 50 Hz
IDENTIFICATON PLATE
The air conditioner can be identified by the plate which is placed in the electrical panel of the machine. The model and any
eventual accessories which are installed are indicated by an "X" in the corresponding box
The plate carries the following data:
•
Model and series number of the machine.
•
Type of power supply.
•
Power absorbed by the unit and the single components.
•
Current absorbed by the unit and the single components.
•
The set points of the cooling circuit pressostatic valve and safety valve.
•
Type of refrigerant.
•
Loading or pre-loading of each cooling circuit.
8
s