Electric Heaters - Uniflair Amico Installation Manual

Electric heaters

Amico units can be equipped with electric heaters. For each model there are two levels available: standard and improved.
The finned elements are characterised by maintaining low power density of the surfaces in a highly efficient way, therefore
limiting overheating of the elements and consequently increasing their lifespan.
Thanks to the low surface temperature of the heating elements, the ionisation effect on the air is limited. This heating
system has two functions:
• heating the air to arrive at the set point conditions;
• post-heating during the phase of dehumidification, in such a way as to retain the air temperature at set point.
Therefore, the heating power installed is able to maintain the dry bulb temperature in the room during the dehumidification
process.
54
In both the upflow and downflow models, the electrical heaters'
safety thermostats TSR and TSRA are accessible for manual
reset of the heaters' alarm from inside the electrical panel in
the lower right corner.