Discharge Temperature Threshold Sensor (Only On Chilled Water Models) - Uniflair Amico Installation Manual

Discharge temperature threshold sensor (only on CHILLED WATER models)

An NTC temperature sensor is an optional accessory which maintains the supply air temperature of the unit above a
threshold value. The sensor is connected to the microprocessor control system as described in the electrical diagram of
the unit.
The sensor has a temperature range of -50°C and +50°C and a protection level of IP67; it can be installed outside the unit
by means of a cable which is 3 metres long. A minimum distance of 2 metres is advisable from the unit discharge, as shown
in the diagram for upflow units.
STM
2 m
STM
57