Safety; General Instructions; Warning For Lifting And Transportation; Warnings For Installation - Uniflair Amico Installation Manual

SAFETY

General Instructions

WARNING! Removal of, or tampering with,
safety devices is a violation of EUROPEAN
SAFETY STANDARDS.
WARNING! During installation authorised
personnel must wear individual safety devices.
Uniflair S.p.A will only consider itself responsible for the safety,
reliability and performance of the machine if:
• repair work has only been carried out by authorised
personnel;
• the electric installation conforms to the standards currently
in force;
• the devices are used in conformity with the relative
instructions.
Carefully read this instruction manual before carrying out any
kind of use or maintenance work on units.
Installation, maintenance and use must be carried out
respecting all of the work safety standards.
The operator responsible for the above mentioned services
must be suitably specialised and possess expert knowledge
of the devices.
Uniflair S.p.A refuses all responsibility for damage to people
or objects due to the inobservance of the safety standards.

Warning for lifting and transportation

Lifting and transportation of the units must be carried out by
specialised personnel as described in the relative paragraphs.
The load must always be solidly anchored to the bearing
element of the lifting equipment and means of transport. No-
one must remain near the suspended load, nor in the working
area of the crane, forklift truck or any other lifting equipment
or means of transport. Adopt all of the cautions provided by
the relevant safety standards, in order to prevent any possible
damage to people or objects.

Warnings for installation

Any type of work on the electrical installation must only be
carried out by specialised technicians who are experts in
this field.
Specialised technical personnel must use appropriate
equipment when checking the grounding of devices.
Installation may only take place in locations where there is
NO public access.

Intended use

Amico air conditioning units have been designed and produced
to carry out air conditioning, within the limits and methods
described in the present manual. The air conditioners must
be used exclusively in internal environments.
No modifications may be made to the units or their parts
without explicit written consent from Uniflair S.p.A.
6

Warnings for use

Only use the machinery for the purpose for which it was
designed and manufactured.
Environmental limits for use
The environmental conditions for the use of Amico air
conditioners are fall within the following values:
• Tmin=18°C • Tmax=30°C
• %rHmin=30% • %rHmax=70%

Safety during maintenance work

All repair work must be carried out by professionally qualified
personnel authorised by Uniflair S.p.A.
Unplug the machine form the power supply before starting
any maintenance work.
While drawing up this manual, we have considered all of the
operations which are part of normal maintenance operations.
N.B. Do not carry out any work which has not been specified
in this manual.