Uniflair Amico Installation Manual page 14

A1
A2
A3
A4
D1
D5
D?
D7
C
D7
A
F
1
F
14
A5
A6
A7
D2
E
D
5
Description of the components
A - User terminal
Allows the unit to be turned on or off and the configuration
and visualization of the condition of the machine.
• A1 LCD Display
• A2 ALARM key:visualization and reset of alarms;when
the alarm is activated, it flashes red
• A3 PRG key: access to the configuration menu
• A4 ESC key : exit from the screens
• A5 UP key : scroll through the menu
• A6 ENTER key : confirm
• A7 DOWN key: scroll through the menu
B - Electrical panel door
Allows access to the electrical panel of the machine.
D3
C - Cover panel
Allow access to the internal components of the machine.
D - Electrical panel
• D1 Magnetothermic
I
- auxiliary
- heater (optional)
- humidifier (optional)
- fans
- compressors
• D2 Interface board
D6
• D3 Dirty filter sensor
D7
• D4 Air flow sensor
B
• D5 Main switch
• D6 Terminal board
D7
D
• D7 Input/output electrical supply cables
A
• D7 Input/output electrical auxiliary cables
B
• D7 Input/output condensing unit supply (optional) - Only
C
D8
on units with air cooling
• D7 Entrance/exit signal cables (RS485 and/or LAN)
D
• D8 Phase sequence relay
E - Air Filter
Filter the air released into the environment
F - Fans
E
F1 Fan speed regulator
D