Proper Disposal Of Alcatel-Lucent Equipment - Alcatel-Lucent 4306G Series Installation Manual

IEC/EN 60950
CE Marking
cTUVus Marked
CB Scheme Certified
For a complete list of Country Specific Regulations please speak with your Alcatel-Lucent Representative.

Proper Disposal of Alcatel-Lucent Equipment

For the most current information on Global Environmental Compliance and Alcatel-Lucent products please see our website
at http://www.alcatel-lucent.com/enterprise.
Waste of Electrical and Electronic Equipment
Alcatel-Lucent products at end of life are subject to separate collection and treatment in the EU Member
States, Norway, and Switzerland and therefore are marked with the symbol shown at the left (crossed-out
wheelie bin). The treatment applied at end of life of these products in these countries shall comply with
the applicable national laws of countries implementing Directive 2002/96EC on Waste of Electrical and
Electronic Equipment (WEEE).
European Union RoHS
Alcatel-Lucent products also comply with the EU Restriction of Hazardous Substances Directive 2002/
95/EC (RoHS). EU RoHS restricts the use of specific hazardous materials in the manufacture of
electrical and electronic equipment. Specifically, restricted materials under the RoHS Directive are
Lead (including Solder used in printed circuit assemblies), Cadmium, Mercury, Hexavalent Chromium, and Bromine. Some
Alcatel-Lucent products are subject to the exemptions listed in RoHS Directive Annex 7 (Lead in solder used in printed
circuit assemblies). Products and packaging will be marked with the "RoHS" label shown at the left indicating conformance
to this Directive.
China RoHS
Alcatel-Lucent products also comply with China environmental declaration requirements and are labeled with
the "EFUP e" label shown at the left.
November 2009 | 0510574-02 Alcatel-Lucent 4306G OmniAccess Switch Series | Installation Guide