Safety And Regulatory Compliance - Alcatel-Lucent 4306G Series Installation Manual

Omniaccess switch
Table of Contents

Advertisement

Safety and Regulatory Compliance

Alcatel-Lucent provides a multi-language document containing country specific restrictions and additional safety and
regulatory information for all Alcatel-Lucent hardware products. The Alcatel-Lucent Safety and Regulatory Addendum can
be viewed or downloaded from the following location: https://service.esd.alcatel-lucent.com.
!
CAUTION
This product complies with 21 CFR Chapter 1, Subchapter J, Part 1040.10, and IEC 60825-1: 1993, A1: 1997, A2: 2001, IEC
60825-2: 2000.
For continued compliance with the above laser safety standards, only approved Class 1 modules from our approved vendors
should be installed in Alcatel-Lucent products.
FCC Class B Device
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits. This equipment should be installed and operated with a
minimum distance of 13.78 inches (35 cm) between the radiator and your body for 2.4 GHz and 5 GHz operations. This
transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. When operated in the
5.15 to 5.25 GHz frequency range, this device is restricted to indoor use to reduce the potential for harmful interference with
co-channel Mobile Satellite Systems.
Alcatel-Lucent 4306G
EN 55022 Class B
EN 55024
IEC/EN 60950
CE Marking
cTUVus Marked
CB Scheme Certified
Alcatel-Lucent 4306GW
FCC 15.247/15.407
EU R&TTE Directive 1999/5/EC (EN 300 328, EN 301 893, EN 301 489)
EU LV Directive 2006/95/EC
Alcatel-Lucent 4306G OmniAccess Switch Series
LASER PRODUCT
Use of controls or adjustments of performance or procedures other than those specified in this
manual may result in hazardous radiation exposure.
| Installation Guide
CLASS 1
Specifications, Safety, & Compliance | 19

Advertisement

Table of Contents
loading

Table of Contents