Table of Contents
Advertisement
About the Alcatel-Lucent 4306G OmniAccess Switch
The Alcatel-Lucent 4306G OmniAccess Switch is an enterprise-class, wireless LAN switch. This switch connects, controls,
and integrates wireless Access Points (APs) and Air Monitors (AMs) into a wired LAN system.
Alcatel-Lucent 4306G OmniAccess Switch controller
The Alcatel-Lucent 4306G is capable of supporting up to 16 external, campus connected APs.
4306G: no built-in external AP support; optional Alcatel-Lucent AP upgrade licenses are available.
4306G-8: includes built-in campus connected AP support for up to 8 APs; optional Alcatel-Lucent AP upgrade licenses
are available.
The Alcatel-Lucent 4306GW is capable of supporting up to 16 external, campus connected APs in addition to its single,
internal AP.
4306GW-1: includes a single, internal AP; no built-in external AP support; optional Alcatel-Lucent AP upgrade licenses
are available.
4306GW-9: includes a single, internal AP, as well as, built-in campus connected AP support for up to 8 APs; optional
Alcatel-Lucent AP upgrade licenses are available.
N O T E
Minimum Software Requirements
The Alcatel-Lucent 4306G OmniAccess Switch switch requires AOS-W 3.4 or later.
AOS-W software builds prior to version 3.4 does not support the Alcatel-Lucent 4306G OmniAccess Switch. If your network
currently runs a software build prior to 3.4, you must upgrade the software on your master and local switches to 3.4 or later
prior to installing an Alcatel-Lucent 4306G OmniAccess Switch in your existing network.
N O T E
Package Checklist
Alcatel-Lucent 4306G OmniAccess Switch
AC Power Cord (country-specific)
Rack Mount Brackets with Hardware (for rack mounting)
Left Side Bezel (not installed)
Alcatel-Lucent 4306G OmniAccess Switch | Installation Guide
Feature related AP licenses are counted independently and in addition to the Alcatel-Lucent AP
upgrade licenses. Contact your Alcatel-Lucent sales representative for complete details regarding
software licensing options and support capacity.
The master switch, its redundant master switch, and all of its local switches must run on the same
code of AOS-W. Once you upgrade your network and install an Alcatel-Lucent 4306G OmniAccess
Switch into your network, verify that the software version on your switch matches the rest of your
network. If the code shipped on the switch is prior to the version that you upgraded your network to,
you must upgrade the code on the switch to match the rest of the network.
Chapter 1
Hardware Overview
Hardware Overview | 7
Advertisement
Table of Contents
