Model 8410B18411A Network Analyzer - HP 83522A Service Notes

Model 83522A General Information
An RF Plug-in extender cable set that
provides all electrical connections to the
RF plug-in when it is removed from the
sweep oscillator. The RF Plug-in Interface
connector (P2) and the Power Supply
Interface connector (PI) are extended by
separate cables.
One Hex Balldriver for use in Model 8350A
repairs.
One 16-pin and one 20-pin integrated
circuit test clip.
1-36. A listing of sevice accessories available
including service cables, wrenches, adapters,
and extender boards is given in Table 1-3.
1-37. Model 8 4 1 OB/8411 A Network
Analyzer
1-38. The Model 8350A Sweep Oscillator, with
the Model 83522A RF Plug-in installed, is
compatible with the HP Model 8410B Network
Analyzer system. The combination of the Model
8410B Network Analyzer, the Model 8411A
Frequency Converter, and an appropriate dis-
play plug-in forms a phasemeter and a ratiometer
for direct phase and amplitude ratio measure-
ment on RF voltages. These measurements can
be made on single frequencies and on swept
frequencies from 110 MHz to 18 GHz. The
Model 8350A/83522A combination is capable of
operation from 110 MHz to 2.4 GHz within this
range. The Model 8410B has an Auto-Frequency
Table 1-3. Service Accessories A vailable
NAME
44-pin printed circuit board extender
R F Plug-in Extender Cables
Adjustment Tool
Wrenches
Service Cables
Adapters
Hex Balldriver
IC Test Clip
*These items are included in a Service Accessories Kit HP Part No. 08350-60020 (2 board extenders are included in this kit).
HP PART NUMBER
08350-6003 1
*
08350-60034"
08350-60035"
8830-0024
08555-20097
8 7 1 0-0946
8120-1578
83525-60019
1250-0777
1250-0082
1250-1404
1250-1 158
1250-0674
1250-0675
1250-0069
8710-0523"
1400-0734*
1400-0979
*
DESCRIPTION
Extends printed circuit boards
Extends R F Plug-in Interface connector (P2)
Extends R F Plug-in Power Supply Interface connector (PI)
Fits miniature adjustment slot on potentiometers
511 6" slotted box/open end
15/64" open end
18" coax with SMA (m) connector on each end
10" coax with SMB snap on (f) and SMA (m)
Type N (f) to BNC (m)
Type N (m) to BNC (m)
Type N (f) t o SMA (f)
SMA (f) to SMA (f)
SMA (f) t o SMB (m)
SMA (f) t o SMC (m)
SMB snap on (m) to SMB snap on (m)
Removes front panel hold down plate hex screws in 8350A
16-pin IC test clip
20-pin IC test clip