Set Reset(Setrst) - Leixen LX928 User Manual

Set Reset(SETRST)

Set Reset will reset the transceiver to factory default
settings, leaving memory channels and the DTMF list
intact.
To perform a Set Reset, press and holding the Menu Key,
rotate the Power Switch to power on the transceiver, the
screen will display "ALL RST ". Press the keys to
▲ or ▼
select "SETRST". Press the Menu key again and the
screen will display "RESET". Press the Menu key a third
time, and the screen will display "Waiting". When the
transceiver restarts, the reset is complete. Note: You may
cancel the reset by pressing any key other than the
"Menu" key when the "Reset?" prompt appears.
Current Channel Delete (MEMRST)
Current Channel Delete will delete the current channel of
the transceiver.
To perform a Reset, press and holding the Menu
MEMRST
Key, rotate the Power Switch to power on the transceiver,
the screen will display "ALL RST ". Press the
▲ or ▼
keys to select "MEMRST". Press the Menu key again and
the screen will display "RESET". Press the Menu key a
third time, the screen will display next memory channel.
That means the delete is complete. Note: You may cancel
the reset by reboot the transceiver. MEMRST can't be
operated in VFO mode.
38