Table of Contents
Advertisement
The default setting is ON.
Backlight (Lamp): Menu 08
You can set backlight behavior through Menu 08. Select
from the following settings:
OFF: Backlight is disabled
KEY: Backlight is active only when a key is pressed.
CONT: Backlight is always enabled.
The default setting is CONT.
Key Lock Function (LOCK): Menu 09
You may lock the transceiver controls by holding the
"MENU" key for two seconds. When the lock is enabled,
the
symbol appears. Unlock the transceiver controls by
again holding the "M" key for two seconds.
You can select what controls are locked through Menu 09
as follows:
KEY: Numeric and function keys on the keypad of the
transceiver, excluding the "MENU" key.
K + S: KEY +▲+▼. Numeric+ function keys+▲+▼
keys, excluding the "MENU".
PTT: PTT Key.
ALL: KEY + DIAL + PTT excluding "MENU" key.
Default is K + S.
Setting Channel Names: (Name): Menus 10/11/12
Menu 10 determines whether the transceiver allowed the
user-defined channel name displayed or not. If it is enable,
all channel would display user-defined channel name, if it
24
Advertisement
Table of Contents
