Table of Contents
Advertisement
F+ Numeral 2：
L/H
F+ Numeral 3:
SAVE
F+ Numeral 4：
STEP
F+ Numeral 5：
REV
F+ Numeral 6：
SQT
F+ Numeral 7：
VOX
F+ Numeral 8：
FM
F+ Numeral 9：
RPT
F+ Numeral 0：
ADD
F+V/M
F+ *
Power ON +V/M
High/low power switch.
Enable/disable Save function.
In
VFO
step,optional:2K5/5K/6K25/
10K/12K5/25K。
In MR mode, enable/disable Reserve.
The channel should set RPT+/RPT-
and offset advanced.
Squelch mode， OFF/CTC/NDCS/IDCS
optional. Refer to attached Table
CTCSS/DCS code.
Enable/disable
Transmission
Enable/disable FM Radio, Range ：
87.5-108MHz。
Repeater Set，SING/RPT-/RPT+. Can
only be set in VFO Mode.
Scan add, in MR/CH mode, current
channel be scanned or not.
In VFO mode, press F+V/M to store
current frequency to memory channel.
Stored channel number can be selected
via ▲▼ key after press F key, press
V/M key to confirm save and exit.
Press F+* to start SCAN, in VFO
mode scan by step, in MR/CH mode
scan among channels.
Switch between VFO/MR mode and
CH mode.
9
mode,
set
Voice
frequency
Operated
Advertisement
Table of Contents
