Set Opening Display (Open-D): Menu 13 - Leixen LX928 User Manual

" #
, -
space
6 7

Set Opening Display (Open-D): Menu 13

You can select what displays when the transceiver first
powers on by using Menu 13. Select from the following
options:
ALL: Boot displayed as full screen display.
SYS: Boot displayed as system welcome word.
User: Boot display as User-defined word.
You can set the user-defined word in the programming
software.
Time: Boot display as remaining lease time.
The default setting is USER.
Custom Keys Set (P1-P2、M Key): Menus14-17
The left side keys "P1" and "P2" of the LX-928 are user
programmable. Each key has two possible functions,
defined in Menus 14 through 17.
Key functions are accessed via a short press (press and
release) or long press (press and hold for 1.5 seconds by
default, although this time can be adjusted in the
programming software).
While functions for short and long press of Keys P1, P2
are defined in Menus 14 through 17, the MENU key is a
special case. The short press of the MENU key can only
$ %
space
/ 0
8 9
space
'
space
1 2
<
space
26
*
space
3 4
= >
+
5
space