Table of Contents
Advertisement
after you finish speaking. Set the VOX Delay in Menu 27.
Too short a delay will cause the transmitter to unkey too
frequently. Delay can be set from 1 to 4 seconds; the
default setting is 3 seconds.
VOX S (Sensitivity):
VOX Sensitivity determines the level of sound that is
needed for the VOX to key the transmitter. You should
experiment with VOX Sensitivity to find a level that is
appropriate to your voice but does not trigger on the
presence of too much other background noise. Set Vox S
using Menu 28. There are eight possible levels. The
default level is 3.
VXB (VOX inhibited when receiving):
Set Menu 29 to ON if you do not want VOX active while
the receiver is active. To avoid the receiver keying the
VOX by mistake, it is probably a good idea to leave this
setting at its default ON state.
Wide and Narrow Bandwidth Set (WIDNAR): Menu
30
You can set the channel bandwidth to "WIDE" or
"Narrow" using Menu 30. Set this according to your
country or radio service regulations. The default setting is
WIDE.
33
Advertisement
Table of Contents
