Leixen LX928 User Manual page 27

software, set the transceiver's individual ID code. This
can be any code of up to 15 characters, using the digits
0-9, *, #, A, B, C, and D. The default transceiver
individual call ID code is 1000.
Group Call: Using a group call character in any part of a
radio calling sequence will call all radios in a specific
calling group. The only radios in the group that will not
automatically respond to a group call are transceivers
which are either set to selective call only or those which
have receive or receive/transmit inhibit enabled. The
group character may be *, #, A, B, C, or D. The default
group character is A.
Consider the following example.
Set 10 transceivers as follows:
Item
Transceiver
1
Transceiver
2
Transceiver
3
Transceiver
4
Transceiver
5
Individual ID
80811
80812
80813
80814
80815
21
Unite ID
C
C
C
C
C
Group ID.
Group 1
Group 1
Group 1
Group 1
Group 1