Board, Flash Unit; Board, Lens Device - Sony MVC-FD81 Service Manual

2-4. RL-51 BOARD, FLASH UNIT
1 - 3 MF block (50080)
4 - !º RL-51 board
!¡
RL holder
!™ - !§ FLASH unit
!£ Screw, tapping
1 MF block (50080)
8 Connector
From CN001 2P,
RL-51 board
7 Connector
From CN002 7P,
RL-51 board
4 Three screws, tapping
(B2 × 5)
2-5. CD-206 BOARD, LENS DEVICE
Prism cushion
(Not supplied)
!™ Connector
(From CN1 13P, FLASH unit)
!∞ Fuse replacement
caution label
(B2 × 5)
Flexible board
(From CN2 6P, FLASH unit)
9 Release
the claws
!¡ RL holder
6 Ground plate (A)
2 Two screws, tapping
(B2 × 7.5)
1 FP-66 flexible board
From CN431 16P,
CD-206 board
2 Three screws, tapping
!§ FLASH unit
!¢ Release
the claw
!º RL-51
board
5 Charging capacitor
of FLASH unit
3 CD-206 board
5 Lens frame
CD sheet (Not supplied)
4 Two screws, tapping
(B2 × 5)
Be sure to read "Note on the CCD imager replacement" on
page 4-7 when changing the CCD Imager.
2-3
(B2 × 5)
3 MF block (50080)
Short jig (see page 5)
1k Ω . 1W
parts.No.1-215-869-11
When handling the
FLASH unit, be sure
to discharge the
charging capacitor
before handling it.
For discharge short jig
to the positive (+) and
negetive (-) terminals
of the charging capacitor
for about ten seconds.
6 Lens device