Lens Assembly, Microphone, Flash Unit - Sony DSC-F55 Service Manual

2-4. LENS ASSEMBLY, MICROPHONE, FLASH UNIT

Note : The built-in charging capacitor inside the FLASH unit is charged to the maximum of 300 V.
7 Microphone cushion
[ SERVICE POSITION 1 (FLASH UNIT, LENS BLOCK) ]
Note 1: The built-in charging capacitor inside the FLASH unit is charged to the maximum of 300 V.
Downloaded from: https://www.usersmanualguide.com/
There is a danger of electric shock due to the high voltage when the capacitor is handed by
bare hand. Discharge the voltage remained in the capacitor, referring to the Service Note (See page 5).
4 Two screws (tapping head (2 lock) )
5 Microphone retainer
Be careful when handling
it as it is not fixed.
6 Microphone unit
There is a danger of electric shock due to the high voltage when the battery is handed by
bare hand. Discharge the voltage remained in the battery, referring to the Service Note (See page 5).
Battery box
Base
AC power
adaptor
2 Lens assembly
Flash unit Lens block
Note 2: The old CPC-9 jig (Parts code: J-6082-393-B)
cannot be used, because it cannot operate
the adjustment remote commander.
2-3
3 Flash unit
(Remove the three claws as shown.)
1 Two screws (tapping head (2 lock) )
Adjustment remote
commander (RM-95)
CPC-9 jig
(J-6082-393-C) (Note 2)
Base