Table of Contents
Advertisement
INSTALLATION
HDD Installation
For 4 channel model
1.
Remove the screw from the bracket on the
Bottom side of the DVR.
2.
Hold the HDD bracket with your finger as
shown in the figure and pull it to separate
it from the DVR.
3.
Install the HDD on the bracket and fix it by
fastening 4 screws on its sides.
When installing HDD, make sure to install
in the correct direction.
4.
Insert back the bracket installed with the
HDD into the DVR.
5.
Fix the bracket by fastening the screw.
１０
Advertisement
Table of Contents
