Table of Contents
Advertisement
XJ-1000 FR
2- Volume Control
Mute
Sound volume control (
3- Subsonic Control
Subsonic
ON/OFF
Frequency
setting
(16-30 Hz)
4- Filter Control
Filter type select
(OFF/LPF/HPF)
Frequency Setting
(50~4kHz)
Slope Setting
(12/18/24/30 dB/oct.)
5- Phase Control
This function allows the user to change
the phase at 45 degree increment.
(0 °/45 °/90 °/135 °/180 °/225 °/270 °/315 °)
(Each increment = 2 ms/milli-second)
www.earthquakesound.com
-
80dB~0dB)
page 13
How To Program Using PC
6- External Trigger Control
External trigger switch
External trigger status
7- Memory Store/Recall Control
Three (3) independent memory
storage modes; they can be
used to save all the DSP
settings as a single
configuration.
There are four (4) memory
storage modes that can store
(4) independent DSP settings.
User can program Mem 1 / 2 / 3
using the memory store
function.
A 4th setting (default) resets all
the setting back to original
factory settings.
8- EQ Mode Control
Green = ON
RED = OFF
Click to select
green= SELECT
P R O
Advertisement
Table of Contents
