Table of Contents
Advertisement
XJ-1000 FR
Software Control Panel
1- File Menu
Load
1. Load specified file setting.
2. Click File/Load.
3. Select a configuration file(.dat)
for loading.
4. Load configuration to control panel
for preview.
Save
1. The parameters save to the specified file
2. The amplifier should be connected to PC
then apply Command Link in advance.
3. Click File/Save to save settings on screen.
4. Select path and edit file name to save.
Write
1. Write specified file setting to amplifier.
2. Configuration data has to be loaded with
File/Load in advance.
3. Click File/Write to amp to transfer setting
amplifier.
4. Finish.
www.earthquakesound.com
2
1
5
6
9
page 12
How To Program Using PC
3
4
About
Exit
Connect
Link amplifier. Amplifier
settings will update the status
of control program
simultaneously.
7
8
Check Software version.
Exit this program.
P R O
Advertisement
Table of Contents
