TABLE OF CONTENTS CONGRATULATIONS Congratulations........Congratulations and thank you for purchasing the XJ-300R amplifier. The XJ series are stand alone compact amplifiers that allow custom home installation to have a powerful high efficiency amplification while fitting into small places. The XJ-300R comes with a set of standard ears that Features..........
Page 3
= amplifier is in auto mode If you are using the XJ-300R to drive a green = amplifier is sensing signal subwoofer (including Earthquake’s THOR amplifier is on In-Wall SUB10), then you will need to set the crossover below 100Hz.
Page 4
XJ-300R with MQB-1 XJ-300R with Q10B MQB-1 4-Ohm Parallel Application Q10B 8-Ohm MQB-1 Application 8-Ohm Standard Application...
110-120C ~ AC/60Hz/180W control fully clockwise. PRODUCT SUPPORT (220 option) Input Impedance Please contact Earthquake Sound Technical Support Department for questions regarding any of Dimensions (HxWxD) 8.2 kilo-ohm line-level inputs the products mentioned in this manual. 2” x 9” x 9”...