Page 2
(A) Five (5) year limited warranty plan coverage guidelines: superior enhancement of your mobile audio system. With proper installation and responsible First year: Earthquake pays for labor, parts, and ground freight (only in US mainland, listening, your amplifier(s) will give you years of near perfect sound reproduction.
Page 3
RMA number on every box. (G) Disputes Resolution: All disputes - between client(s) and Earthquake Sound Corporation - resulting from the five (5) year limited warranty policy must be resolved according to the laws & regulations of the county of Alameda, California.
PH800W/2 VTEK-MC5 VTEK-MC5 Tweeter Tweeter Protect Power Bypass Bypass 20Hz 5kHz Gain Filter Setting Speaker Level Crossover Frequency Input Rca level input Output VTEK-MC5 Midrange VTEK-MC5 Midrange Crossed RCA level outputs, can be used to feed other amplifiers in the system. The gain knob is not a volume control.
PH1000W/2 +18dB boost @ 45Hz 3-way switch RCA level inputs, with +12dB boost @ designed to shape/ runs the amp a range of 0.2V to 5V. 12kHz essential boost the response in low-pass, RMS. boost for high-pass curve in a low-pass full-range or amplifier applications mode application.
PH2200W/4 3-way switch feeds, RCA outputs 3/4 a full range, high-pass or low- pass signal. FC6.2 Midrange FC6.2 Midrange FC6.2 FC6.2 Tweeter Tweeter Remote ON Auto ON Set Xover knob to 3-way switch for each block Minimum (20Hz), & runs CH1/2 or CH3/4 in low set Xover switch to Signal Sensor: Four RCA level inputs...
PH2000W/ 1 * Test the alternator output. Factory alternators will produce 60-80 amperes at best. Wear and heat will reduce the output by 40%. PH2000W/ 1.1 * Alternator ground (-) must be reinforced, use 4-gauge cable instead of the factory 8-gauge. Variable 10dB boost at 40Hz.
PH5000W/ 1 • Test the alternator output. Factory alternator will produce 60 to 80 amperes at best. Wear and heat will reduce the output by 40%. SIGNAL SENSOR: This feature allows you to • Alternator ground (-) must be reinforced, use 4-gauge cable instead of the factory 8-gauge. eliminate the use of a remote wire to turn on your amplifier.
PH10000W/ 1 The low-pass filter, This switch will line blocks unwanted high match the voltage of your frequencies to allow head unit, which will cleaner low-frequencies. deliver high sound quality High Level RCA, Low RCA, Low and performance. speaker input Level input Level out "RCA level"...
Page 10
PH10000W/ 1 - Linking Installation Example Specifications Are Subject To Change Without Notice www.earthquakesound.com...
Need help?
Do you have a question about the PowerHouse PH800W/2 and is the answer not in the manual?
Questions and answers