Table of Contents
Advertisement
XJ-1000 FR
XJ-1000FR Boot screen
This procedure takes approximately 3 seconds during which
the model number and company name are displayed.
Transition to main screen is carried automatically.
XJ-1000FR Main screen
The LCD display shows the status of DSP settings and the
output level (volume level).
Subsonic On
Externa l Trigger Enable
Volume Control
"VOLUME" control is available from main screen. Press remote
control "LEFT / RIGHT" keys or press encoder "LEFT / RIGHT" to
change the volume level (from -80dB to 0 dB). Equal volume level
should be set (recommended) between both main speakers.
Explanation of symbols on screen
Press remote control "UP / DOWN" keys to change
functions. Press encoder "ENTER" to change functions.
www.earthquakesound.com
Filter On
Bridge On
Press remote control "LEFT / RIGHT" keys or press encoder
"LEFT / RIGHT" to change the settings. Press "ENTER" to save.
page 7
XJ-1000FR
Unmuted
EQ mode
Lock Enable
LCD Display Functions
Muted
Output level meter
P R O
Advertisement
Table of Contents
