XJ-1000 FR
Equalizer modes
Flat
User EQ
ONLY AVAILABLE WHEN IN USER MODE
Press the right key on remote or turn the encoder knob to the right to enter function. A +/- 10dB gain level adjustment
is available for each frequency point.
When using the rotary encoder: turn "LEFT / RIGHT" to increase or decrease gain / press "ENTER" to change
frequency point or "EXIT".
When using remote control: press "UP / DOWN" to change frequency point / press "LEFT / RIGHT" to increase or
decrease gain / press "ENTER" to leave function.
External Trigger
Lock Setting
Lock setting locks the DSP setting in memory and prevents adjustment via the DSP push button
controls. To lock, set to "Enable". To turn off the lock, set to "Disable".
www.earthquakesound.com
Six equalizer modes to choose from: No-equalization (flat) / Music / Movie / Dynamic /
Impact / user mode (set by user).
The " external trigger" setting is used to allow an external 12 V trigger source to turn the
amplifier ON and OFF with a 12 V trigger from another device.
Programing Instructions - Equalizers
page 9
P R O