Page 2
(A) Five (5) year limited warranty plan coverage guidelines: superior enhancement of your mobile audio system. With proper installation and responsible First year: Earthquake pays for labor, parts, and ground freight (only in US mainland, listening, your amplifier(s) will give you years of near perfect sound reproduction.
RMA number on every box. (G) Disputes Resolution: All disputes - between client(s) and Earthquake Sound Corporation - resulting from the five (5) year limited warranty policy must be resolved according to the laws & regulations of the county of Alameda, California.
PH800W/2 VTEK-MC5 VTEK-MC5 Tweeter Tweeter Protect Power Bypass Bypass 20Hz 5kHz Gain Filter Setting Speaker Level Crossover Frequency Input Rca level input Output VTEK-MC5 Midrange VTEK-MC5 Midrange Crossed RCA level outputs, can be used to feed other amplifiers in the system. The gain knob is not a volume control.
PH1000W/2 +18dB boost @ 45Hz 3-way switch RCA level inputs, with +12dB boost @ designed to shape/ runs the amp a range of 0.2V to 5V. 12kHz essential boost the response in low-pass, RMS. boost for high-pass curve in a low-pass full-range or amplifier applications mode application.
PH2200W/4 3-way switch feeds, RCA outputs 3/4 a full range, high-pass or low- pass signal. FC6.2 Midrange FC6.2 Midrange FC6.2 FC6.2 Tweeter Tweeter Remote ON Auto ON Set Xover knob to 3-way switch for each block Minimum (20Hz), & runs CH1/2 or CH3/4 in low set Xover switch to Signal Sensor: Four RCA level inputs...
PH2000W/ 1 * Test the alternator output. Factory alternators will produce 60-80 amperes at best. Wear and heat will reduce the output by 40%. PH2000W/ 1.1 * Alternator ground (-) must be reinforced, use 4-gauge cable instead of the factory 8-gauge. Variable 10dB boost at 40Hz.
PH5000W/ 1 • Test the alternator output. Factory alternator will produce 60 to 80 amperes at best. Wear and heat will reduce the output by 40%. SIGNAL SENSOR: This feature allows you to • Alternator ground (-) must be reinforced, use 4-gauge cable instead of the factory 8-gauge. eliminate the use of a remote wire to turn on your amplifier.
PH10000W/ 1 The low-pass filter, This switch will line blocks unwanted high match the voltage of your frequencies to allow head unit, which will cleaner low-frequencies. deliver high sound quality High Level RCA, Low RCA, Low and performance. speaker input Level input Level out "RCA level"...
Page 10
PH10000W/ 1 - Linking Installation Example Specifications Are Subject To Change Without Notice www.earthquakesound.com...
Need help?
Do you have a question about the PowerHouse PH800W/2 and is the answer not in the manual?
Questions and answers