This section describes the function of each control on the
remote control used to control this unit or a YAMAHA
CD player, tuner, tape deck, etc. with the remote control
Some components may not be controlled by this remote control.
■ Controlling this unit
1 Infrared signal transmitter
Sends signals to this unit.
Turns on this unit.
This button is operational only when POWER on the front panel
is pressed inward to the ON position.
Sets this unit to the standby mode.
• This button is operational only when POWER on the front
panel is pressed inward to the ON position.
• In the standby mode, this unit consumes a small amount of
power in order to receive infrared-signals from the remote
4 Input selector buttons
Select the input source you want to listen to.
5 VOLUME +/–
Controls the sound output level.
This does not affect the OUT (REC) level.
■ Controlling other components
The functions of the buttons to control other YAMAHA
components are the same as those of the corresponding
buttons on those components. Refer to those components'
instruction manuals for details.
6 Tuner buttons
Control various functions of the tuner.
Selects a preset station number (1 to 8).
Selects a preset station group (A to E).
7 CD player / tape deck buttons
Control various functions of the CD player or the tape
• DIR B and A/B apply only to the double cassette tape deck.
• Pressing DIR A will reverse the tape direction on the single
cassette tape deck with the automatic reverse function.
8 CD/TAPE selector switch
Switches to control either CD player functions or tape
CONTROLS AND FUNCTIONS