Stihl TS 400 Instruction Manual page 25

Pull the starter grip slowly with your
N
right hand until you feel it engage –
then give it a brisk strong pull – do
not pull out the starter rope all the
way
Do not let the starter grip snap back – it
may break! Guide it back into the
housing in the opposite direction so that
it can rewind properly.
With a new engine, pull the starter rope
several times to prime the fuel line.
TS 400
When the engine has turned over for the
first time
Choke
4
Move the choke lever (4) to e
N
5
Press the button of the
N
decompression valve (5) again
before each fresh attempt to start
the engine
continue cranking
N
Once the engine is running
3
Blip the throttle trigger – the Master
N
Control lever (3) jumps to the
operating position F – and the
engine begins to idle
If the carburetor has been set correctly,
the abrasive wheel should not rotate
when the engine is idling.
The cut-off machine is now ready for
use.
English
23