Stihl TS-700 Manual To Operations

Abbreviated Guide
Reminders
1. Read fully the STIHL TS-700 Instruction manual
provided.
2. Use the necessary PPE (Personnel Protective
Equipment).
•
Safety glasses
• Face shield.
•
Hearing protection.
•
Coveralls
•
Hard hat.
•
Sturdy Gloves.
•
Steel Capped Boots.
•
Respiratory protection where necessary.
3. Cutting Wheels
Inspect the cutting wheel prior to installation and
o
use.
Discard any cracked or damaged cutting wheels.
o
IMPORTANT: Use the
o
3.1. Composite Resin Abrasive Wheels (to
EN12413).
•
Check the label.
•
Check whether for Wet or Dry cutting.
•
Even if suitable for wet you may need to
discard after use each day.
•
Depending on the manufacturer wheels may
be suitable for: e.g. Asphalt, Concrete,
Stone, soft Steel
3.2. Diamond Abrasive Wheels (to EN13236).
•
Check the label.
•
Suitable for Wet cutting only.
•
Depending on the manufacturer wheels may
: STIHL TS-700 Cutting Machine
correct wheel for the job.
be suitable for: e.g. Asphalt, Concrete,
Stone, Abrasive concrete, Fresh concrete,
Clay Brick, Clay Pipe.
3.3. Cutting Wheel Specs.
• Suitable for Spindle diameter of 20mm
•
Suitable for speeds > 5080 RPM
•
OD - 350mm (max cut depth 116 mm).
• Machine is supplied with thrust washers of
118mm. Do not change these.
4. Fueling up
4.1. Move away from the work area.
4.2. Refuel in a well ventilated area.
4.3. Use only your hands to remove the fuel cap (i.e.
no tools).
4.4. Clean any spilled petrol off the machine before
starting.
4.5. Use the correct fuel (2-strike unleaded 50:1
mixture).
5. Carrying the machine
5.1. with your right hand on the top bar,
5.2. the cutting wheel should face behind (exhaust
away from your body)
6. Transporting your Machine
6.1. Always transport with blade removed.
6.2. Drain fuel and run machine until it stops.
6.3. Tie down/restrain to prevent movement.
7. Provided with the Machine.
7.1. STIHL TS-700 Instruction Manual.
7.2. STIHL Tool Kit comprising, Rotation locking pin,
Multipurpose wrench, Small screw-driver.
NOTE: This document is only intended as a
reminder. Please read the STIHL TS-700
Instruction manual fully before operating the
machine. The STIHL TS-700 Instruction manual
also provides valuable guidance on the correct
use of the cutting machine in different scenarios.