English
► Press the locking lever (1).
The battery (2) is unlocked and can be removed.
10 Switching the Saw On/Off
10.1 Switching On
► Hold the saw with your right hand on the control handle –
wrap your thumb around the control handle.
► Disengage the chain brake.
► Hold the saw with your left hand on the handlebar – wrap
your thumb around the handlebar.
► Depress the lockout button (1) with your thumb and hold it
there.
► Pull the trigger (2) with your index finger and hold it there.
The saw chain runs.
68
2
1
1
2
10.2 Switching off
► Release the trigger and lockout lever.
The saw chain stops running.
11 Checking the Saw
11.1 Checking the Chain Sprocket
► Switch off the chain saw, engage the chain brake and
remove the battery.
► Disengage the chain brake.
► Remove the chain sprocket cover.
a
► Use a STIHL gauge to check the wear marks on the
sprocket.
► If wear marks are deeper than a = 0.5 mm: Contact your
STIHL servicing dealer.
The chain sprocket must be replaced.
11.2 Checking the Guide Bar
► Switch off the chain saw, engage the chain brake and
remove the battery.
► Remove the chain and guide bar.
10 Switching the Saw On/Off
0458-716-9621-B