Topcom SOLOGIC B921 User Manual page 25

Base ring tone volume
OK
OK
OK
OK
5.2 Setting the dialling mode
There are two dialling modes for telephone connections:
- DTMF / tone dialling (most common)
- Pulse dialling mode (only necessary if this devices is operated on an
older PBX!)
OK
OK
OK
OK
5.3 Setting the system PIN
Some functions are only available if you know the PIN code for the
base station.
The PIN code is 4 characters long. The default PIN code is "0000".
Proceed as follows to change the PIN code and set your own PIN:
OK
OK
OK
OK
4 5 6
G J M
H K N
I L O
OK
4 5 6
G J M
H K N
I L O
5.4 The key (Flash)
R
Press the Flash key to use special services on your external line such
as "call waiting" (providing your telephone line provider offers this
service) or to forward a call when you are using a PBX. The flash key
R briefly interrupts your call. You can set this interruption time to
100 ms or 300 ms. However, if your system requires a longer flash
time, you can change this.
1 Press the menu/OK key.
2 Select "BASE" and confirm.
3 Select "RING VOLUME" and confirm.
4 Select the required volume (Off, 1-5) and confirm.
1 Press the menu/OK key.
Select "BASE" and confirm.
2
3 Select "DIAL MODE" and confirm.
4 Select "TONE" or "PULSE" and confirm.
1 Press the menu/OK key.
2 Select "BASE" and confirm.
3 Select "SYSTEM PIN" and confirm.
4 Enter the "OLD PIN" and press OK.
Enter the "NEW PIN" and confirm.
5
Base settings
23