Maintenance Schedule; Taking Out Of Service - Whisper Power m-sq25 User Manual

Marine diesel generating set 230/400v / 50hz
Hide thumbs Also See for m-sq25:
Table of Contents

Advertisement

MAINTENANCE
4.3.1

Maintenance schedule

Check oil level
Check water inlet filter
Check the level of the cooling liquid
Check hoses for loose connections or deterioration
Change oil and oil filter
Check and tighten nuts, bolts, etc.
Check exhaust
Check air vent
Check and readjust V-belt
Check electrical connections
Change oil
Check battery
Check air vent
Check and readjust V-belt
Check impeller water pump
Replace impeller water pump
Retighten cylinderhead bolts and readjust
valve clearance
Replace oil filter
Replace fuel filter
Check air cleaner element
Retighten cylinderhead bolts , adjust valve
clearance
Replace the V-belt
Check lubricating oil pressure
Check injector and injection pressure
Check inlet air filter
Check cooling system
26
daily
daily
daily
daily
after first 50 hours
after first 50 hours
after first 50 hours
after first 50 hours
after first 50 hours
after first 50 hours
150 hours
150 hours
150 hours
150 hours
150 hours
300 hours
300 hours
300 hours
300 hours
300 hours
1000 hours
1000 hours
2000 hours
2000 hours
2000 hours
2000 hours
4.3.2

Taking out of service

When not using the generating set for a longer period it is
recommended
to
execute
procedure.
1
Clean the engine.
2
Loosen the fuel suction pipe and fuel return and put
them in a can with preservation diesel fuel. Start the
engine and run the engine warm.
3
Drain the hot engine oil and refill with preservation oil.
4
Stop the engine and take loose the inlet of the raw
water pump. Drain the water from the water lock.
Crank the engine having the raw water inlet sucking
anti freeze from a can until the pump, heat exchanger
and manifold are filled.
5
The coolant can stay in the engine
6
Disconnect the battery and store it in a place free of
frost and dry and charge it regularly.
7
Close inlet- and outlet openings with tape.
8
Protect the generating set against the influences of
bad weather conditions.
This method of preservation will be sufficient for 6 months.
Change oil before using the engine again.
an
engine
preservation
November 2010 / M-SQ20 / 25 / EN

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

M-sq20

Table of Contents