Q4. How Can I Handle An Original That Contains Too Many Pages To Load In The Adf - Konica Minolta bizhub C284 Quick Assist Manual

5
5.4 Q4. How can I handle an original that contains too many pages to
load in the ADF?
A4. To copy an original containing a large number of pages, use the serial scan print function.
The Separate Scan function enables scanning of an original in installments and handling of the resulting copy
jobs as a single job.
Tips
- You can also use the copy function by switching between the ADF and the Original Glass for scanning
the originals.
Operation procedure
1
Load the original into the ADF.
% Do not load more than 100 sheets at a time into the original tray, and do not load the sheets up to
the point where the top of the stack is higher than the , mark.
2
Tap [Copy].
3
Tap [Application], then select [Separate Scan] to set it to [ON].
4
Press the Start key.
Scanning of the original loaded in the ADF starts.
5
After scanning of the original pages are completed, set the next lot of the original in the ADF, then press
Start.
6
Repeat step 5 until all the original pages are scanned.
% To change the setting for scanning, tap [Change Setting] and change the setting.
5-10

Q4. How can I handle an original that contains too many pages to load in the ADF?

bizhub C554/C454/C364/C284/C224
5.4