Entering Program Mode; Program Menus - Titan TS 141A Installation Manual

TS141A REMOTE STARTER

Entering Program Mode

Ignition On Press & Release
Off-On-Off
the Program
On
Button 3 Times.
1) With the ignition in the OFF position, turn the ignition key from "Off" to "On" 3
times, ON-OFF-ON-OFF-ON within three seconds.
NOTE: Leave the key in the ON position
2) Press and release the Program Button. The park lights will flash and the horn
(optional) will honk to confirm entering program mode.
3) Select desired Program Menu (See below). The park lights will flash and
horn (optional) will honk to confirm the selected menu.
4) Select Programmable Setting:
a) Press and release the Program Button the correct number of times to
select the desired Program Setting. The park lights and LEDs will flash
and the horn (optional) will honk to indicate the Program Setting that has
been selected. For example: 1 flash/honk= Program Setting 1;
b) Press and Hold the Program Button until the park lights flash and the
horn(optional) honks to confirm the desired setting. For example: 1 flash/
honk= Setting 1; 2 flashes/honks= Setting 2; 3 flashes/honks= Setting 3.
c) Turning the ignition key to the "Off" position or 30 seconds of no activity
will exit Program Mode. This will be confirmed with a light flash and a
long horn (optional) honk. The Program Menu may be changed at any
time by pressing the transmitter button (below), this will allow the
installer to jump from one menu, then quickly jump to another menu and
change another setting without re-entering Program Mode.

Program Menus

Menu 1: User Settings (
This program menu is for the adjustments for the user and door lock options.
Menu 2: Additional Settings (
This program menu is for additional settings.
Menu 3: Starter Settings (
This program menu is for various remote car starter applications.
For Menu 1, For Menu 2,
press the
press the
button
2 flashes/honks= Program Setting 2; etc...
Button)
Button)
Button)
INSTALLATION MANUAL
For Menu 3,
press the
button
button